If you own a Redmi Note 10 Lite Android device, you need to download and flash in the official Redmi Note 10 Lite Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.
Redmi Note 10 Lite Specs
Redmi Note 10 Lite mobile was launched on 12th March 2020. The phone comes with a 6.67-inch touchscreen display with a resolution of 1080×2400 pixels and an aspect ratio of 20:9. Redmi Note 10 Lite is powered by a 2.3GHz octa-core Qualcomm Snapdragon 720G processor. It comes with 4GB of RAM. The Redmi Note 10 Lite runs Android and is powered by a 5020mAh battery. The Redmi Note 10 Lite supports proprietary fast charging.
The Redmi Note 10 Lite on the rear packs a 48-megapixel primary camera with an f/1.79 aperture; an 8-megapixel camera with an f/2.2 aperture; a 5-megapixel camera with an f/2.4 aperture, and a 2-megapixel camera with an f/2.4 aperture. The rear camera setup has phase detection autofocus. It sports a 16-megapixel camera on the front for selfies with an f/2.48 aperture.
The Redmi Note 10 Lite runs MIUI is based on Android and packs 64GB of inbuilt storage that can be expanded via a microSD card (up to 512GB) with a dedicated slot. The Redmi Note 10 Lite is a dual-SIM (GSM and GSM) mobile that accepts Nano-SIM and Nano-SIM cards. The Redmi Note 10 Lite measures 165.70 x 76.60 x 8.80mm (height x width x thickness) and weighs 209.00 grams. It was launched in Aurora Blue, Champagne Gold, Interstellar Black, and Glacier White colors.
Before you start to flash the Stock Firmware ROM, please make sure you make a backup of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.
However, it’s recommended to check for OTA updates manually on your device via the phone settings. Settings > About phone > Software updates > Check for Updates. If the new software update is available, then tap Download now.
REQUIREMENTS TO FLASH Redmi Note 10 Lite STOCK FIRMWARE ROM.
- A working detectable USB Cord.
- The firmware you want to flash.
- A Windows PC.
- A Good Battery Backup
- File Size – 5GB
- Android Version – 10
- Country –
- Filename – CAS_images_V126.96.36.199.RJJCNXM
- GET ROM
full firmware to Reinstall board software (only for dead and bootloop devices)
- V188.8.131.52.RJWEUXM EEA Stable: Download
Full OTA/Recovery Updates:
to upgrade a working phone (first check Installed firmware version with in your Phone)
How To Flash Redmi Note 10 Lite Stock Firmware ROM Using Flash Tools.
There are various ways to flash stock ROM on a phone, for this phone use method Below