Redmi Note 10 Pro V12.5.4.0 Stock Firmware ROM (Flash File)


Redmi Note 10 Pro V12.5.4.0 Stock Firmware ROM (Flash File)

If you own a Redmi Note 10 Pro Android device, you need to download and flash in the official Redmi Note 10 Pro Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

Redmi Note 10 Pro Specs

Redmi Note 10 Pro mobile was launched on 4th March 2021. The phone comes with a 6.67-inch touchscreen display. Redmi Note 10 Pro is powered by an octa-core Qualcomm Snapdragon 732G processor. It comes with 6GB of RAM. The Redmi Note 10 Pro runs Android 11 and is powered by a 5050mAh battery. The Redmi Note 10 Pro supports proprietary fast charging.

The Redmi Note 10 Pro on the rear packs a quad-camera setup featuring a 64-megapixel primary camera with an f/1.9 aperture and a pixel size of 0.7-micron; an 8-megapixel camera; a 5-megapixel camera, and a 2-megapixel camera. The rear camera setup has autofocus. It has a single front camera setup for selfies, featuring a 16-megapixel sensor with an f/2.45 aperture and a pixel size of 1.0-micron.

The Redmi Note 10 Pro runs MIUI 12 is based on Android 11 and packs 64GB of inbuilt storage that can be expanded via microSD card (up to 512GB) with a dedicated slot. The Redmi Note 10 Pro is a dual-SIM (GSM and GSM) mobile that accepts Nano-SIM and Nano-SIM cards. The Redmi Note 10 Pro measures 164.50 x 76.15 x 8.10mm (height x width x thickness) and weighs 192.00 grams. It was launched in Dark Night, Glacial Blue, and Vintage Bronze colors.

Before you start to flash the Stock Firmware ROM, please make sure you make a backup of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

However, it’s recommended to check for OTA updates manually on your device via the phone settings. Settings > About phone > Software updates > Check for Updates. If the new software update is available, then tap Download now.


  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • File Size – 3.4GB
  • Android Version – 11
  • Country –
  • Filename – V12.5.4.0.RKFIDXM

EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)

  • V12.5.4.0.RKFMIXM Global Stable: Download
  • V12.0.3.0.RKFEUXM EEA Stable: Download
  • V12.5.4.0.RKFINXM India Stable: Download
  • V12.5.2.0.RKFRUXM Russia Stable: Download
  • V12.5.1.0.RKFTRXM Turkey Stable: Download
  • V12.5.1.0.RKFTWXM TAIWAN Stable: Download
  • V12.5.3.0.RKFIDXM Indonesia Stable: Download

Full OTA/Recovery Updates:
to upgrade a working phone (first, check the Installed firmware version within your Phone)

  • V12.5.4.0.RKFEUXM EEA Stable: Download
  • V12.5.6.0.RKFMIXM Global beta: Download
  • V12.5.4.0.RKFINXM India Stable: Download

How To Flash Redmi Note 10 Pro Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method Below

Follow the link below for the instructions on how to flash stock ROM